Tongue & Groove Flooring


Our plywood flooring is approved by the EWPAA. The EWPAA’s structural plywood flooring has demonstrated to be both safe and reliable when used in commercial and industrial buildings, and is easily designed to resist the high loading criteria required by the building codes. Its resilience and strength have been utilised in storage decks, truck floors and flooring in sporting complexes and agricultural buildings. Plywood flooring systems are a cost effective alternative to suspended floors in such applications.

 

Tongue and Groove

Structural plywood is supplied with square edges, however, it may be specified with a tongue and groove along the length of the panel. Based on full scale testing the plastic T&G joint has a design capacity of 7.5kN concentrated imposed (live) load.

In applications where the concentrated load is 7.5kN or less, the T&G joint eliminates the need for nogging. Please note panel end joints must be supported by a sub-floor member. For design concentrated loads exceeding 7.5kN the T and G joint must be supported by a designed nogging.

 

Kokoda Hardwood T&GKokoda Hardwood CD Grade F14/F17

Manufactured from selected structural sound hardwood veneer with a “C” or “D” grade face and a “D” grade back (mixed coloured veneer).
Sheet Size: 2400 x 1200
Glue Bond: “A” Bond “Phenolic” black colour – 72 hour boil.
Thicknesses: 12mm(5 ply), 15mm(5 ply), 17mm(7 ply), 19mm(9 ply), 21mm(9 ply), 25mm(11 ply)
Sheets/Pack: 12mm – 70, 15mm – 56, 17mm – 49, 19mm – 44, 21mm – 40, 25mm – 34
Stress Grades: Usually F14 & F17. Higher stress grades available on application.

ECOply T&GEcoPly CD Grade F11

ECOply is a product of Charter Holt Harvey.  It can be detailed to meet the requirements of the Building Code of Australia in relation to structure, durability, fire, moisture and energy efficiency.

Sheet Size: 2400 x 1200, 2700 x 1200
Glue Bond: “A” Bond “Phenolic” black colour – 72 hour boil.
Thicknesses: 15mm, 17mm, 19mm, 21mm, 25mm
Sheets/Pack: 15mm – 35, 17mm – 32, 19mm – 44, 21mm – 28, 25mm – 20
Stress Grades: F11

AraucoPly T&GArauco CD Grade F8

AraucoPly® Sanded Panels are finished with 150-grit sandpaper on the face and 120-grit sandpaper on the back, facilitating easy finishing with excellent results. Made from 100% Radiate pine with a stable composed core, minimum voids and a high quality face. AraucoPly is pre-sanded and ready to finish, perfect for interior and exterior applications.

Sheet Size: 2400 x 1200
Glue Bond: “A” Bond “Phenolic” black colour – 72 hour boil.
Thicknesses: 12mm, 15mm, 18mm, 25mm
Sheets/Pack: 12mm – 80, 15mm – 65, 18mm – 54, 25mm – 19
Stress Grades: F8